HYDREX MV

HYDREX™ MV

HYDREX MV for heavy duty hydraulic systems

For heavy duty hydraulic oil applications operating at high pressures and in wide temperature ranges.

  • Combines minimal fluid friction at low start-up temperatures with protection at high operating temperatures
  • Energy efficiencies are realized compared to monograde hydraulic oil when exposed to wide temperature fluctuations

Ideally suited for piston, gear and vane hydraulic oil pumps used in industrial, marine, forestry, mining and other hydraulic systems.

HYDREX MV Products

Applications

  • Recommended for wide temperature use in piston, gear and vane hydraulic pumps found on industrial machinery and mobile equipment
  • May be used in systems equipped with fine filters down to 3 microns without loss of additives or filter plugging
  • NSF H2 listed (no allowable food contact)

OEM Approvals

Bosch Rexroth

  • Successfully evaluated against Bosch Rexroth requirements
  • Recommended for use in equipment manufactured by Bosch-Rexroth

Denison

  • Recommended for use in equipment manufactured by Denison

Dynex

  • Recommended for use in equipment manufactured by Dynex

Eaton

  • Approved for Eaton E-FDGN-TB002-E
  • Recommended for use in equipment manufactured by Eaton Vickers

Hydreco

  • Recommended for use in equipment manufactured by Hydreco

Komatsu

  • Recommended for use in equipment manufactured by Komatsu

Oilgear

  • Recommended for use in equipment manufactured by Oilgear

Sauer-Danfoss

  • Recommended for use in equipment manufactured by Sauer-Danfoss

Applications

  • Recommended for wide temperature use in piston, gear and vane hydraulic pumps found on industrial machinery and mobile equipment
  • May be used in systems equipped with fine filters down to 3 microns without loss of additives or filter plugging
  • NSF H2 listed (no allowable food contact)

OEM Approvals

Bosch Rexroth

  • Successfully evaluated against Bosch Rexroth requirements
  • Recommended for use in equipment manufactured by Bosch-Rexroth

Denison

  • Approved for Denison HF-0
  • Recommended for use in equipment manufactured by Denison

Dynex

  • Recommended for use in equipment manufactured by Dynex

Eaton

  • Approved for Eaton E-FDGN-TB002-E
  • Recommended for use in equipment manufactured by Eaton Vickers

Fives Cincinnati

  • Approved for Fives Cincinnati P-68

Hydreco

  • Recommended for use in equipment manufactured by Hydreco

Komatsu

  • Recommended for use in equipment manufactured by Komatsu

Oilgear

  • Recommended for use in equipment manufactured by Oilgear

Sauer-Danfoss

  • Recommended for use in equipment manufactured by Sauer-Danfoss

Industrial standards

Meets:

  • DIN 51524 Part 3 HVLP
  • ISO 11158 HV
  • ASTM D6158 HV

Suitable for use:

  • AIST 126 and 127

Applications

  • Recommended for wide temperature use in piston, gear and vane hydraulic pumps found on industrial machinery and mobile equipment
  • May be used in systems equipped with fine filters down to 3 microns without loss of additives or filter plugging
  • NSF H2 listed (no allowable food contact)

OEM Approvals

Bosch Rexroth

  • Successfully evaluated against Bosch Rexroth requirements
  • Recommended for use in equipment manufactured by Bosch-Rexroth

Denison

  • Approved for Denison HF-0
  • Recommended for use in equipment manufactured by Denison

Dynex

  • Recommended for use in equipment manufactured by Dynex

Eaton

  • Approved for Eaton E-FDGN-TB002-E
  • Recommended for use in equipment manufactured by Eaton Vickers

Fives Cincinnati

  • Approved for Fives Cincinnati P-70

Hydreco

  • Recommended for use in equipment manufactured by Hydreco

Komatsu

  • Recommended for use in equipment manufactured by Komatsu
  • Meets the requirements of the Komatsu HPV35+35 pump test

Oilgear

  • Recommended for use in equipment manufactured by Oilgear

Sauer-Danfoss

  • Recommended for use in equipment manufactured by Sauer-Danfoss

Industrial standards

Meets:

  • DIN 51524 Part 3 HVLP
  • ISO 11158 HV
  • ASTM D6158 HV
Suitable for use:
  • AIST 126 and 127
  • JCMAS HK

Applications

  • Recommended for wide temperature use in piston, gear and vane hydraulic pumps found on industrial machinery and mobile equipment
  • May be used in systems equipped with fine filters down to 3 microns without loss of additives or filter plugging
  • NSF H2 listed (no allowable food contact)

OEM Approvals

Bosch Rexroth

  • Successfully evaluated against Bosch Rexroth requirements
  • Recommended for use in equipment manufactured by Bosch-Rexroth

Denison

  • Approved for Denison HF-0
  • Recommended for use in equipment manufactured by Denison

Dynex

  • Recommended for use in equipment manufactured by Dynex

Eaton

  • Approved for Eaton E-FDGN-TB002-E
  • Recommended for use in equipment manufactured by Eaton Vickers

Hydreco

  • Recommended for use in equipment manufactured by Hydreco

Komatsu

  • Recommended for use in equipment manufactured by Komatsu

Oilgear

  • Recommended for use in equipment manufactured by Oilgear

Sauer-Danfoss

  • Recommended for use in equipment manufactured by Sauer-Danfoss

Industrial standards

Meets:

  • DIN 51524 Part 3 HVLP
  • ISO 11158 HV
  • ASTM D6158 HV
Suitable for use:
  • AIST 126 and 127

HYDREX MV ARCTIC 15

  • For extremely cold temperatures.
  • Recommended for use in critical low temperature systems
  • Anti-wear hydraulic oil characteristics extend equipment life
  • Water separability and hydrolytic stability without loss of performance additives
  • Rust and corrosion protection against water damage
  • Readily biodegradable as measured by OECD 301B
  • Allows hydraulic oil systems to start at temperatures as low as -50°C/-58°F, with operating range between -45°C/-49°F and 23°C/73°F

Applications

  • Recommended for vane, gear and axial piston hydraulic pumps for applications requiring ISO viscosity grades 10 and 15
  • Recommended for use in emergency shutdown valves or other critical low temperature heavy-duty hydraulic systems required to respond quickly and reliably
  • NSF H2 listed (no allowable food contact)

OEM Approvals

Bosch Rexroth

  • Suitable for use in equipment manufactured by Bosch-Rexroth

Denison

  • Suitable for use in equipment manufactured by Denison

Dynex

  • Suitable for use in equipment manufactured by Dynex

Eaton

  • Suitable for use in equipment manufactured by Eaton Vickers

Hydreco

  • Suitable for use in equipment manufactured by Hydreco

Oilgear

  • Suitable for use in equipment manufactured by Oilgear

Racine

  • Suitable for use in equipment manufactured by Racine

Sauer-Danfoss

  • Suitable for use in equipment manufactured by Sauer-Danfoss
Case Study

"...I’ve probably cut my downtime by half.”

Jamie Enright,
Owner/Operator,
M.J. Enright and Sons Logging, Inc.

ReadCase Study

Related Product Lines