AUTOMOTIVE


DURATRAN™ – Universal Tractor Transmission Oil (THF, UTTO)

The DURATRAN™ THF/UTTO line of heavy-duty transmission-hydraulic fluids is designed for use in farm tractors, mining and construction equipment with a common oil system for transmission, differential, hydraulic, power take-off, wet brake and power-steering mechanisms.

Compared to competitive tractor fluids, DURATRAN™ fluids offer:

Outstanding resistance to breakdown caused by oxidation and high temperatures

Formulated with high performance base oils and special oxidation inhibitors, DURATRAN™ fluids strongly resist sludge and varnish build-up, as well as fluid thickening to extend fluid change intervals considerably, past the OEM recommendations.

Controlled Frictional Properties

DURATRAN™ fluids have excellent shear stability and the correct balance of lubricity and friction for the optimal operation of brakes, clutches and power-take off mechanisms. This helps prevent brake noise and brake chatter.

Protection against wear

DURATRAN™ fluids exceed existing John Deere Extreme Pressure (EP) and Final Drive Gear Wear test requirements and perform well in the demanding Eaton/Vickers hydraulic pump wear test. These features provide excellent wear protection to bearings and gears under demanding, shock-loaded operating conditions.

Exceptional Low Temperature Performance

Formulated with high performance base oils, DURATRAN™ fluids demonstrate exceptional low temperature fluidity, which allows easier cold weather start-up of all equipment, even at very low temperatures. DURATRAN™ XL Synthetic Blend and DURATRAN™ Synthetic may be used at temperatures down to -41°C/-42°F.

Typical characteristics are shown below:

 

DURATRAN™

 

DURATRAN™

XL Synthetic Blend

Synthetic

Viscosity, cSt @ 40°C

55.2

40.0

46.4

Viscosity, cSt @ 100°C

9.4

8.45

9.9

Viscosity Index

153

193

206

Brookfield Viscosity, cP @ - 20°C

2,670

1,120

1,310

Brookfield Viscosity, cP @ - 35°C

17,300

Brookfield Viscosity, cP @ - 40°C

61,200

13,750

14,430

Pour Point, °C/°F

-45/-49

-51/-58

-48/-53

Flash Point, COC, °C/°F

241/462

219/426

213/437

Base Number (D2896), mg KOH/g

10.2

10.3

10.3

DURATRAN™ fluids are recommended where the following specifications are called for:

 

Agricultural Equipment

John Deere

DURATRAN™ JDM J20C, DURATRAN™ XL Synthetic Blend JDM J20D, DURATRAN™ Synthetic JDM J20C and JDM J20D

CNH (Case I.H., J.I. Case New Holland Group)

DURATRAN™ - MAT3540, MS-1209/MAT 3505, MS-1210/JIC-145/MAT 3506, MS-1230/CNH MAT 3509, ESN-M2C134-D/MAT 3525, MS-1207, MS-1206, MS-1205,MS-1204/JIC-185, B-6, B-5, JIC-144, JIC-143, FNHA-2-C-200.00, ESN-M2C134-A/B/C, ESN-M2C86-B/C, ESN-M2C53-A, ESN-M2C48-B

DURATRAN™ XL  Synthetic Blend  - MS-1209/MAT 3505, MS-1210/JIC145/MAT 3506, MS-1230/CNH MAT 3509, ESN-M2C134-D/MAT 3525 MS-1207, MS-1206, MS-1205, MS-1204/JIC-185, B-6, B-5, JIC-144, JIC-143, FNHA-2-C-201.00, FNHA-2-C-201.00A (134-D), FNHA-2-C-200.00, ESN-M2C134-A/B/C, ESN-M2C86-B/C ESN-M2C53-A, ESNM2C48-B

DURATRAN™ Synthetic - MS-1209/MAT 3505, MS-1210/JIC145/MAT 3506, MS-1230/CNH MAT 3509, ESN-M2C134-D/MAT 3525 MS-1207, MS-1206, MS-1205, MS-1204/JIC-185, B-6, B-5, JIC-144, JIC-143, FNHA-2-C-201.00, FNHA-2-C-201.00A (134-D), FNHA-2-C-200.00, ESN-M2C134-A/B/C, ESN-M2C86-B/C ESN-M2C53-A, ESNM2C48-B

White Farm (Oliver)

Q-1826, Hydraulic Transmission Fluid (HTF), Q-1802, Q-1766B, Q-1722, Q-1705

Massey-Ferguson

M-1145* (DURATRAN™, DURATRAN™ Synthetic), M-1141, M-1135, M-1143, M-1129-A, M-1127-A/B, M-1110

(*Note: For UTTO applications only. Do not use in engine application where Super Tractor Oil Universal (STOU) are recommended.)
(*Note: Many Tractor OEM’s have since been consolidated to one Brand. Specifications have been noted to be the last known specification published for specific Tractor brand names. Check with your OEM supplier for the latest lubricant specification required for your equipment or your OEM Manual.)

AGCO / Deutz-Allis / Allis. Power Fluid 821XL, 272843, 257541, 246634 GIMA MF CMS M1145 (DURATRAN™, DURATRAN™ Synthetic (Approved))

GIMA MF CMS M1141 (all DURATRAN products)

Kubota UDT, Kubota UDT2 (DURATRAN™ XL Synthetic Blend, DURATRAN™ Synthetic)

Steiger (SEMS 17001); Versatile (ESN-M2C134-D); Landini (Tractor II Hydraulic Fluid); Hesston-Fiat (Oliofiat Tutela Multi-F) (all DURATRAN products)

Volvo WB101 – 97303.(VCE 1273,03) (DURATRAN™ (Approved), DURATRAN™ Synthetic (Approved)); Valtra G2-98 DURATRAN™ and DURATRAN™ Synthetic.

ZF Transmissions: DURATRAN™ TE-ML 03E, 05F, 06K, 21F (axles). DURATRAN™ Synthetic TE-ML 03E, 05F, 21F (axles)

Komatsu KES 07.866 (DURATRAN™, DURATRAN™ Synthetic)

Mahindra as an Agriculture OEM - All three DURATRAN™ products

Kioti - DURATRAN™ XL Synthetic Blend (Approved)

Voith Heavy Industrial

Hitachi Heavy Industrial

AECON/ Miller

Heist / Kalmar / Kessler / Fantuzzi

DANA-OHTM-UTTO-LV (DURATRAN™ Synthetic - Approved)

Transmissions and Differentials

API GL-4 (Manual Transmissions, Spiral Bevel Axles, and Hypoid gears in moderate service). Allison Type C-4 and C-3 Fluids (Obsolete). Caterpillar TO-2 (Obsolete). Sundstrand Hydrostatic Transmission Fluid. Dresser Construction Equipment Division - Transmission/Hydraulic Fluid. Clark Lift Truck Transmission Fluid TA12, TA18, HR 500 (DURATRAN™ XL, DURATRAN™ Synthetic), HR 600 (DURATRAN™, DURATRAN™ Synthetic)

Hydraulic Pumps

Parker / Abex / Denison: HF 0/1/2. Eaton / E-FDGN-TB002-E. Dynamatic Limited (DANFOSS-Plessey-Sundstrand)

Symbols

  1. Agriculture
  2. Consumer Automobile
  3. Construction
  4. Food & Beverage
  5. Forestry
  6. Heavy-Duty Transportation
  7. General Manufacturing
  8. Medium-Duty Transportation
  9. Mining
  10. Corrugated Packaging
  11. Gas Plants, Pipelines & Power Generation
  12. Rail
  13. Transit
  14. Waste Operations