AUTOMOTIVE


Other Automotive Lubricants (2-Stroke)

Petro-Canada Lubricants small engine oil is designed to give excellent performance in air-cooled, two-strokes per cycle engines operating under all conditions. This oil is especially formulated for use in oil injection as well as conventional pre-mixed gasoline/oil lubricated two-stroke engines.

Petro-Canada Lubricants small engine oil contains high performance additives, which give excellent anti-scuff and anti-wear performance to ensure reliability, internal cleanliness and long engine life. The additive system used produces minimal spark plug, ring, piston and valve deposits allowing for good starting and continued efficient engine operation.

Petro-Canada Lubricants small engine oil also contains special rust inhibitors with a high film strength, which protect engines against rust during use and in storage.

Basic manufacturers’ recommendations should be followed so as to obtain maximum protection during prolonged storage. Care should be taken not to mix two-stroke oils from different manufacturers.

Petro-Canada SUPREME™ Synthetic Blend 2-Stroke Small Engine Oil is a premium synthetic blend, low ash, two-strokes per cycle engine oil for use in many conventional pre-mix fuel/oil, as well as oil injection lubricated engines.

Petro-Canada SUPREME™ Synthetic Blend 2-Stroke Small Engine Oil is certified against JASO FC and meets the requirements of ISO-L-EGC and API TC.

It is designed to lubricate air-cooled, 2-stroke engines in motorcycles, mopeds, snowmobiles, chain saws, generators, lawn mowers, weed trimmers and other landscaping equipment. It is suitable for use in oil injection and premixed lubricated engines at gasoline/oil ratios up to 100:1.

It is recommended for use in air-cooled, 2-stroke snowmobiles including those manufactured by (and more): Bombardier, Arctic Cat, Polaris and Yamaha.

It is recommended for use in 2-stroke lawn maintenance/ forestry equipment including those manufactured by:

  • Dolmar
  • Hitachi
  • Husqvarna
  • John Deere
  • Kawasaki
  • Lawn Boy
  • Massey Ferguson
  • Polaris
  • Powermate (formerly Honda Coleman)
  • Poulan
  • Stihl
  • Tecumseh
  • Weedeater
  • Woods
  • Yamaha
  • Yardman

It is recommended for use in 2-stroke small cc motorcycles and scooters including those manufactured by (and more):

  • Yamaha
  • Bombardier (BRP)
  • Kawasaki
  • TVS
  • Honda

SUPREME™ Synthetic Blend 2-Stroke Small Engine Oil has the following features:

  • Controls deposit formation, ring-sticking and prevents exhaust-port plugging

  • Superior anti-wear and anti-scuff protection

  • Minimizes spark plug fouling and engine preignition

  • Provides excellent protection against rust and corrosion

  • Mixes easily with gasoline and pumps readily down to -40 °C/°F

  • Formulated for oil injection as well as premixed gasoline/oil lubricated engines

  • Keeps smoke emissions low when used at recommended gasoline/oil ratios

  • Dyed blue-green for easy detection of gasoline/oil mixtures

SUPREME™ Synthetic Blend 2-Stroke Small Engine Oil is suitable for use against API Classification TC, TISI, ISO-L-EGC, SAE Fluidity/Miscibility (F/M) Grade 4 and JASO FA, FB and is certified against JASO FC (PCL 694 and PCL 695).

Typical characteristics are shown below:

 

SUPREME™ Synthetic Blend 2-Stroke Small Engine Oil

Viscosity, cSt @ 40°C

34.7

Viscosity, cSt @ 100°C

6.8

Viscosity Index

158

Flash Point, COC, °C/°F

151/304

Pour Point, °C/°F

-51/-60

Brookfield Viscosity, cP @ °C

14,490@ -40

Sulphated Ash, % Wt

0.10

Color

Blue/Green

Suitable Performance Level

API TC

SAE F/M Grade 4

JASO FA, FB and FC

ISO-L-EGC

TISI

 

QUICK MIX CHART

Quantity of Oil per Container of Gasoline

Container Volume

5 L

10 L

25 L

1 Gal

2 Gal

5 Gal

Gasoline to Oil Ratio

mL of Oil

mL of Oil

mL of Oil

oz of Oil

oz of Oil

oz of Oil

16:1

315

625

1560

8.0

16.0

40.0

24:1

210

415

1040

5.5

10.5

26.5

32:1

155

315

780

4.0

8.0

20.0

50:1

100

200

500

2.5

5.0

13.0

100:1

50

100

250

1.5

2.5

6.5

All units are measured by metric and US standards.

Symbols

  1. Agriculture
  2. Consumer Automobile
  3. Construction
  4. Food & Beverage
  5. Forestry
  6. Heavy-Duty Transportation
  7. General Manufacturing
  8. Medium-Duty Transportation
  9. Mining
  10. Corrugated Packaging
  11. Gas Plants, Pipelines & Power Generation
  12. Rail
  13. Transit
  14. Waste Operations