CUTSOL

METWORX™ SYNCUT Series

Excellent for high pressure/high speed machining

METWORX SYNCUT Series product line consists of low foaming, biostatic full synthetic and semi-synthetic cutting fluid concentrate designed for use in high and low pressure metal removal operations.



Our SYNCUT Series product line is available in the following options:


  • METWORX SYNCUT 99 FS is an oil-free synthetic cutting fluid concentrate for use on a variety of metals, including steels, cast iron, and aluminum, except magnesium; in operations ranging from grinding, turning, and to milling.
  • METWORX SYNCUT 300 HD XL is a heavy-duty mineral oil based BIOSTABLE micro-emulsion concentrate designed to be water extendable for the machining and grinding of virtually all metals, except magnesium.
  • METWORX SYNCUT 150 LD XL is a general-purpose semi-synthetic coolant concentrate for use in all metalworking applications such as CNC milling, turning, drilling tapping, grinding, excellent on cast iron and sawing applications. Not recommended on magnesium.

METWORX SYNCUT 99 FS

This product offers good lubricity as well as excellent corrosion control on machinery and workpieces while providing a long sump life.

  • Excellent Corrosion Inhibition
  • Chlorine-Free
  • Nitrite-Free
  • Phenol-Free
  • Very Low Foam - Excellent on High Pressure or High Speed Machining
  • Excellent Cooling for Ability to Maintain Close Tolerances
  • Tolerant of Hard Water
  • Resistant to Damage from Tramp Oil
  • Water Extendable - Economical
  • Long Tank Life

METWORX SYNCUT 300 HD XL

  • Improved biological protection
  • Exceptional foam control for high pressure operations
  • Chlorine-free

METWORX SYNCUT 150 LD XL

  • Low Concentrate Oil Biostable Semi-Synthetic Fluid
  • Offers Excellent Workpiece Visibility
  • Good Lubricity
  • Superior Cooling
  • Formulated without the use of Chlorine, Phenols, Nitrites, or DCHA

METWORX SYNCUT 99 FS
This product is excellent on cast iron and may also be used for grinding: blanchard, diamond wheel, belt, disk, etc. METWORX SYNCUT 99 FS is completely oil-free and may be used in most coolant mist units for machining and grinding operations.


METWORX SYNCUT 300 HD XL
This product is a heavy-duty semi-synthetic coolant concentrate designed for use in high and low pressure metal removal operations such as all CNC milling, turning, drilling, tapping, grinding and sawing. Not recommended on magnesium.


METWORX SYNCUT 150 LD XL
METWORX SYNCUT 150 LD XL is designed for use in all metalworking applications such as CNC milling, turning, drilling, tapping, and grinding. This product is also excellent on cast iron and sawing applications.

METWORX SYNCUT Series Products

Expert Q&A

Gas Plant, Pipeline & Power Gen: Upgrading Your Lubricant – How Petro-Canada Provides Support

LearnMore