ENDURATEX Synthetic EP

ENDURATEX™ Synthetic EP

Reduced friction and excellent low temperature fluidity

ENDURATEX Synthetic EP gear lubricants are premium performance, extreme pressure lubricants designed for enclosed industrial gears and bearings operating under severe load conditions and in wide extremes of temperature.

  • Uses advanced Synthetic base oils and additives to reduce friction and improve energy efficiency over a wide temperature range
  • Outstanding anti-wear protection, to help extend equipment life
  • Outstanding oxidative and thermal stability, which can mean extended fluid and component life
  • Designed for enclosed gearboxes and bearings operating under severe load conditions, and in wide temperature extremes

Petro-Canada’s ENDURATEX Synthetic EP premium performance lubricants are recommended for enclosed industrial gear drives and bearings particularly where they are operated under heavy duty conditions such as heavy loading, slow speed, shock loads and in wide extremes of temperature.

For gearboxes that operate outdoors, selected ISO grades of ENDURATEX Synthetic EP oils are capable of operating at temperatures as low as -30°C (-22°F) or below. ENDURATEX Synthetic EP oils are compatible with mineral oils, polyalphaolefin lubricants and most seal materials except natural rubber.

ENDURATEX Synthetic EP Products

OEM Approvals


Siemens / Flender Rev. 15

  • Reference: Helical, Bevel, and Planetary Gear Units
  • Approval Class: Approved for Use

OEM Approvals


Hansen Gearboxes

  • Reference: RnD.16.0029-A-CE / ISO DIN51502
  • Approval Class: Approved for Use   

NSF-H2

  • Approval Class: Registered

Siemens / Flender Rev. 15

  • Reference: Helical, Bevel, and Planetary Gear Units
  • Approval Class: Approved for Use

WIFAG

  • Reference: CLP HC 150, 220, 320, 460 Gearbox
  • Approval Class: Approved for Use

OEM Approvals


Hansen Gearboxes

  • Reference: RnD.16.0029-A-CE / ISO DIN51502
  • Approval Class: Approved for Use

NSF-H2

  • Approval Class: Registered

Siemens / Flender Rev. 15

  • Reference: Helical, Bevel, and Planetary Gear Units
  • Approval Class: Approved for Use

WIFAG

  • Reference: CLP HC 150, 220, 320, 460 Gearbox
  • Approval Class: Approved for Use

OEM Approvals


Hansen Gearboxes

  • Reference: RnD.16.0029-A-CE / ISO DIN51502
  • Approval Class: Approved for Use

NSF-H2

  • Approval Class: Registered

Siemens / Flender Rev. 15

  • Reference: Helical, Bevel, and Planetary Gear Units
  • Approval Class: Approved for Use

WIFAG

  • Reference: CLP HC 150, 220, 320, 460 Gearbox
  • Approval Class: Approved for Use
Brochure
Plant operations

Gas Plant & Pipeline Lubricants

DownloadPDF

(PDF, 3 MB)